link: http://www.tp-link.com/en/article/?faqid=707 Different Application Scenarios to use the RE200 Different Application Scenarios to use the RE200 RE200 is a dual band range extender, it can extend 2.4Ghz and 5Ghz networks at the same time.The settings are configured slight differently...
This article mainly introduces how to configure and use our TP-LINK Range Extender properly. And also we provide the solution or method of trouble-shooting for some common issues. This article consists of following chapters, please refer to relevant chapters according to the problems you...
Configurations How to configure my range extender via web GUI to extend an existing wireless network's coverage? How to setup the range extender via WPS button? How to configure the range extender as an access point? Why & How do I change the IP address of wireless Access Point &...
Hi~ Welcome to TP-LINK forum! Hope you can get what you want from here. We think you have known the forum rules from our announcement. Except that, Now, we want you know something more: Your thread/post is NOT be visible until a moderator approved it ! The main purpose of the approval...
Model : Hardware Version : Firmware Version : ISP : My RE200 is connected to a CISCO combined cableTV-modem and WiFirouter. CISCO is set up as DHCP-provider and the DHCP function in RE200 is disabled. All computers on my home-network is working OK when connected directly to the...
Model : Hardware Version : Firmware Version : ISP : Hi there,I have recently connection an AC 1750 range extender to my fibre broadband router. The router is in the middle of the house. I wanted to connect an additional range extender to the same router so as to increase signal...
Model : RE200 Hardware Version : Firmware Version : 1.1.5 Build 20180208 Rel. 62854 ISP : Vodafone Hello, I bought the RE200 range extender and it does its work properly rangewise but it sometimes disconnects for 1/2 seconds, interrupting gaming experience and other things like when...
Model : Hardware Version : Firmware Version : ISP : I had a DSL line and I had copied the router's (router 1) to the Powerline adapter and extenders. The Wifi network was setup for example as (SY) I upgraded my DSL connection and I have been provided a new router (router 2). I...
Model : Hardware Version : Firmware Version : ISP : I own the range extender TL-WA850RE V4. I have noticed two issues:
Model : Hardware Version : Firmware Version : ISP : I have two RE200's with firmware 3.14.2, build 170717, Rel. 41935n. Both have the same problem in that the handoff of calls between the modem and range extenders is bad enough that the calls are usually dropped. If I walk veeeeeery...
Model : Hardware Version : Firmware Version : ISP : I have a TP-Link WPA4220 and have had it since September 2017. Connection has been good however the following problem has now arisen and I hope someone can assist me with resolution:
Model : Hardware Version : Firmware Version : ISP : HI, can you help me, we try to connect the Repeater TP-link RE210 to AP Ubiquiti AC LR, but this not connect.
Model : Hardware Version : Firmware Version : ISP : Basic Question: After the RE305 has been firmware upgraded to 171115, what is the new password?
Model : Hardware Version : Firmware Version : ISP : Hi everyone,
Model : TL-WA850RE Hardware Version : Not Clear Firmware Version : 1.0.0 Build 20170109 Rel. 58858 ISP : Hey,
Model : Hardware Version : Firmware Version : ISP : Hello,
Model : Hardware Version : Firmware Version : ISP : My Internet connection (Not Wifi) keeps dropping down on RE200 and only from the range extender not the router, I tried editing the IP from dynamic to static, I also tried to change the channel on my router which didnt help at all...
Model : Hardware Version : Firmware Version : ISP : Using TP Link Wireless Extender RE200 V1
Model : Hardware Version : Firmware Version : ISP : Is it possible for the extender to get connected to the router via ethernet cable ? I mean like an access point, not by wifi.
Model : TL-WA860RE Hardware Version : Firmware Version : TL-WA860RE(EU)_V5_171116 ISP : Hello,
Model : Hardware Version : Firmware Version : ISP : Hi everyone -
Model : Hardware Version : Not Clear Firmware Version : ISP : Hello,
Model : Hardware Version : Firmware Version : ISP : As noted in the title, how do I change the time on a RE200? There is no option to manually input time value. The date on there is 1/1/2017.
Model : TL-WA850RE Hardware Version : Firmware Version : 1.0.0 Build 20171218 Rel. 59722(6985) ISP :
Model : Hardware Version : Firmware Version : ISP : So, I have purchased a Repeater about 10 days ago. The coverage is great, but the connection is dropping ALL. THE. TIME. Checking the Windows Event Log (System) I get this:
Model : Hardware Version : Firmware Version : ISP : Hello, folks.
Model : Hardware Version : Firmware Version : ISP : I have an RE 450 range extender. My wireless network is 5GHz. When I activated my RE 450 I entered that 5GHz configuration. And that worked - for a while. Now the RE 450 shows my connection as only 2.4 GHz and my devices are...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules