TP-LINK Pharos series base station WBS210/WBS510 has no build-in antennas. Therefore an external antenna is needed for normal operation. To cooperate with WBS210 in PtMP scenario, ISP usually adopt assorting sector antenna TL-ANT2415MS to extend coverage area. In the following we’ll learn how to...
Model : Hardware Version : Firmware Version : ISP : Hi everyone,
FAQ: http://www.tp-link.com/en/article/?faqid=694 Suitable for: CPE510/CPE210/CPE520/CPE220/BS210/BS510 Pharos MAXtream introduction Background 802.11 WLAN is contention-based, built on CSMA/CD. As network scale increases, competition and collisions among devices will be so enormous that...
How to use firmware recovery function of Pharos CPE Suitable for: Pharos CPE, Pharos BS Purpose of this article: Firmware upgrade may not be successful sometimes, for instance unpredictable power failure during the process, and thus your Pharos device may fail to reboot. This article will...
Suitable for: Pharos series products including CPE510, CPE210, WBS510, etc Based on Beta: TP_PharOS_1.3.3_151112_Beta VLAN transfer and management VLAN introduction Does Pharos CPE/WBS support VLAN transfer? Pharos CPE/WBS can transfer VLAN through wireless connection, refer to below...
For all of you fellow UNIX/Linux admins who are concerned about security (and you should be concerned as an admin!), here is a short recipe on how to add privilege separation to your Pharos Control running on a Linux server. Why privilege separation? In short: because Linux is not Windows and we...
This is a short How-To for setting up the PharOS Control daemon on a server running Debian Linux. First, get the required software to install PharOS Control. You will need the PharOS Control software for Linux and a Java run-time environment (JRE). As for the JRE you could either install the...
Hi guys! We prepare a tutorial video on Youtube for you to learn how to use TP-LINK Pharos CPE devices. In this video, we demonstrate how to build a simple point-to-point link within three easy steps, including pre-testing, installation, and alignment. Video address:...
Overview： TP-Link Pharos series product is the solution for remote wireless connection. Remote Wireless Surveillance is one of the common applications of Pharos series. The surveillance solution is using Pharos wireless devices to transmit data between surveillance camera and monitor center. ...
TP-LINK outdoor access points mainly used for long distance transmission in many scenarios. Among these, PtP topology is a typical application, and distance most common used varies from 1~4km so we take 4km for example to explain how to build a PtP link. Now let’s begin the experience sharing. ...
http://www.tplink.com/en/article/?faqid=763 Suitable for: CPE510, TL-WA7510N Brief introduction of DFS function What is DFS? Dynamic Frequency Selection (DFS), refers to a mechanism to allow unlicensed devices, especially those operating out-door to share the 5GHz frequency bands which have...
faq: http://www.tp-link.com/en/article/?faqid=719 The different configurations of Bridge with AP mode among the TP-LINK outdoor access points Although TL-WA5210G, TL-WA7510N and TL-WA7210N all have bridge with AP mode they have differences of configuration.This article is aimed to clarify...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
